CONN PIN RCPT .015-.025 SOLDER

RoHS: Compliant | pbFree: Yes

OSCILLATOR XO 25.000MHZ CMOS SMD

RoHS: Compliant | pbFree: Yes

OSCILLATOR XO 25.000MHZ CMOS SMD

RoHS: Compliant | pbFree: Yes

OSCILLATOR XO 25.000MHZ CMOS SMD

RoHS: Compliant | pbFree: Yes

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

CONN QC TAB 10-12AWG 0.250 CRIMP

RoHS: Compliant | pbFree: Yes

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

LOW PROFILE SOLDER CUP HEADER, .

RoHS: Not Compliant | pbFree: No

CONN SOCKET 50PIN .100 L.104

RoHS: Compliant | pbFree: Yes

Terminals Female Disconnect non-insul 12 - 1

RoHS: Compliant

Terminals F DISC 12-10AWG .250

RoHS: Compliant

Terminals DISCONNECT 12-10 .250X.032

RoHS: Compliant

Terminals Fem Disc Compression TAB

RoHS: Compliant

Terminals DISCONNECT 12-10 .250X.032

RoHS: Compliant

RF JFET Transistors 1-1.1GHz 1500 Watt Gain 22.9dB 65V

RoHS: Compliant

RF Development Tools 1-1.1GHz 1500 Watt Eval Board

RoHS: Compliant

RF MOSFET Transistors 1-1.1GHz 1800 Watt Gain 22.5dB 65V GaN

RoHS: Compliant

Standard Clock Oscillators 25 MHz, 3.3V CMOS SSD

RoHS: Compliant

RF Development Tools 1-1.1GHz 1800 Watt Eval Board

RoHS: Compliant

LAN/Telecom/Cable Testing APPAD-TC-10 TO APPAD-TC-25 UPGRADE

RoHS: Compliant

Fuses with Leads (Through Hole) GG10,3X25,8 16A 230V

RoHS: Not compliant

Ferrite Cores & Accessories P22/9 N49 1025 +10%-10%

RoHS: Compliant

DC Fans DC FAN 25x10mm 5VDC Hydro WIRE

RoHS: Compliant

DC Fans DC FAN 25x10mm 5VDC Ball WIRE

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG M 18.3mm Nickel Bulk - Bulk (Alt: D10-250M-D)

RoHS: Compliant

DISCONNECT FEMALE - Bulk (Alt: D10-250C-D)

RoHS: Compliant

Cable Assembly Flat Ribbon 0.26m 28AWG 26 POS IDC Connector to 26 POS IDC Connector SKT-SKT IDT-IDT Bulk - Bulk (Alt: IDSD-13-D-10.25)

RoHS: Compliant

Conn Board Stacker HDR 20 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: DW-10-14-G-D-1025)

RoHS: Compliant

Cable Assembly Flat Ribbon 0.26m 30AWG 20 POS IDC Connector to 20 POS IDC Connector F-F IDT-IDT Bulk - Bulk (Alt: FFSD-10-D-10.25-01-N)

RoHS: Compliant

Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: MTSW-102-13-G-D-1025)

RoHS: Compliant

Conn Board Stacker HDR 24 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: ZW-12-14-L-D-1025-205)

RoHS: Compliant

Conn Board Stacker HDR 6 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: ZW-03-14-G-D-1025-155)

RoHS: Compliant

Conn Board Stacker HDR 20 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: ZW-10-14-G-D-1025-205)

RoHS: Compliant

Conn Board Stacker HDR 40 POS 2.54mm Solder ST Thru-Hole - Bulk (Alt: ZW-20-14-S-D-1025-170)

RoHS: Compliant

Cable Assembly Flat Ribbon 0.26m 30AWG 50 POS IDC Connector to 50 POS IDC Connector F-F IDT-IDT Bulk - Bulk (Alt: FFSD-25-D-10.25-01-N-R)

RoHS: Compliant

Cable Assembly Flat Ribbon 0.26m 28AWG 40 POS IDC Connector to 40 POS IDC Connector SKT-SKT IDT-IDT Bulk - Bulk (Alt: TCSD-20-D-10.25-01-N-R)

RoHS: Compliant

Cable Assembly Flat Ribbon 0.26m 30AWG 26 POS IDC Connector to 26 POS IDC Connector F-F IDT-IDT Bulk - Bulk (Alt: FFSD-13-D-10.25-01-N-R)

RoHS: Compliant

Cable Assembly Flat 0.26m 28AWG 40 POS IDC Connector to 10 POS IDC Connector/30 POS IDC Connector SKT-SKT/SKT IDT-IDT/IDT Bulk - Bulk (Alt: HCSD-20-D-10.25-01-N-B10)

RoHS: Compliant

Cable Assembly Flat Ribbon 0.26m 28AWG 10 POS IDC Connector to 10 POS IDC Connector SKT-SKT IDT-IDT Bulk - Bulk (Alt: HCSD-05-D-10.25-01-N-P02-R)

RoHS: Compliant

RF MOSFET Transistors RF MOSFET

RoHS: Compliant | pbFree: Pb-Free

Terminals F DISC 12-10AWG .250

RoHS: Compliant | pbFree: Pb-Free

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Compliant

RoHS: Not Compliant

RoHS: Not Compliant

RoHS: Not Compliant

The vibration resistant make disconnect in metallic copper helps overcome the failures caused by high vibration. It has a tab size of 0.250 x 0.032 (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm2). It is 0.72 (18.3 mm) long and 0.25 (6.4 mm) wide. The disconnect is non-insulated, nickel-plated, has a standard barrel configuration and a brazed seam barrel. It comes in boxes of 500.

RoHS: Compliant

RoHS: Not Compliant

Female Disconnect, non-insulated, compression tab, 12 - 10 AWG, 0.250 x 0.032 tab size, brass sleeved barrel, 500 pc. package quantity.

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG Brass F 18.28mm Tin Box

RoHS: Compliant | pbFree: No

FEMALE DISCONNECT COMPRESSION

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG F 18.28mm 7.62mm Tin Box

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG F 18.28mm 7.62mm Tin Box

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG F 18.28mm 7.62mm Tin Box

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG F 18.28mm 7.62mm Tin Box

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG F 18.28mm 7.62mm Tin

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG M 18.3mm Nickel

RoHS: Compliant

Quick Disconnect Terminal 10-12AWG M 18.3mm Nickel

RoHS: Compliant

Female Disconnect, non-insulated, 12 - 1

CIRCUIT BREAKER, 1 POLE, 25A

Female Disconnect, 12 - 1 non-insulated,

Male Disconnect, 12 - 10 non-insulated,

FEMALE DISCONNECT, COMPRE NON-INSULATED,

Male Disconnect, 12 - 10 non-insulated,

Female Disconnect, 12 - 1 non-insulated,

STRONGHOLD MALE DISCONNECT, NON-INSULATE

G874D102512TEU-MINIPWR P-4.2 H

Power Amplifier Kit 3 W Board size L x W: 56 x 55 mm RMS output: 3 W @ 4 Ohm, 14,4 V, 0,3 % THD Current consumption: 500 mA Voltage supply: 6...18 VDC

Handheld Oscilloscope Dimensions L x W x H: 199 x 118 x 49 mm Time basis: 10 ns...50 s/div Vertical sensitivity/div: 5 mV...20 V/div Weight: 0.9 kg Calibration: Calibration Delivery with: 1 Probes / Channel / Carrying Case / Extension Module / Mains Power Battery Charger / Manual / Rechargeable Battery / Software / Test Lead / USB Cable Display: 3.5" TFT-LCD Electrical supply: Li-ion battery / Mains power battery charger Input coupling: AC / DC / GND Input impedance Ohm: 1 MOhm Measuring function: Continuity tester / Diode tester Series: UNI-T UTD1000 Trigger: Auto / Edge / Normal / Pulse width / Rise/Fall Time / Single / Video Type of measurement: RMS AAC max.: 4 A AAC resolution: 0.1 μA ADC max.: 4 A ADC resolution: 0.1 μA Bandwidth: 25 MHz Channel analog: 1 F max.: 100 μF F resolution: 0.01 μF Input: Impedance F: 21 pF Rise Time: 14 ns Sample(ISO CALIBRATED)

Handheld Oscilloscope Dimensions L x W x H: 199 x 118 x 49 mm Time basis: 10 ns...50 s/div Vertical sensitivity/div: 5 mV...20 V/div Weight: 0.9 kg Delivery with: 1 Probes / Channel / Carrying Case / Extension Module / Mains Power Battery Charger / Manual / Rechargeable Battery / Software / Test Lead / USB Cable Display: 3.5" TFT-LCD Electrical supply: Li-ion battery / Mains power battery charger Input coupling: AC / DC / GND Input impedance Ohm: 1 MOhm Measuring function: Continuity tester / Diode tester Series: UNI-T UTD1000 Trigger: Auto / Edge / Normal / Pulse width / Rise/Fall Time / Single / Video Type of measurement: RMS AAC max.: 4 A AAC resolution: 0.1 μA ADC max.: 4 A ADC resolution: 0.1 μA Bandwidth: 25 MHz Channel analog: 2 F max.: 100 μF F resolution: 0.01 μF Input: Impedance F: 21 pF Rise Time: 14 ns Sample rate, single-shot: 0.25 GS/s<

Handheld Oscilloscope Dimensions L x W x H: 199 x 118 x 49 mm Time basis: 10 ns...50 s/div Vertical sensitivity/div: 5 mV...20 V/div Weight: 0.9 kg Calibration: Calibration Delivery with: 1 Probes / Channel / Carrying Case / Extension Module / Mains Power Battery Charger / Manual / Rechargeable Battery / Software / Test Lead / USB Cable Display: 3.5" TFT-LCD Electrical supply: Li-ion battery / Mains power battery charger Input coupling: AC / DC / GND Input impedance Ohm: 1 MOhm Measuring function: Continuity tester / Diode tester Series: UNI-T UTD1000 Trigger: Auto / Edge / Normal / Pulse width / Rise/Fall Time / Single / Video Type of measurement: RMS AAC max.: 4 A AAC resolution: 0.1 μA ADC max.: 4 A ADC resolution: 0.1 μA Bandwidth: 25 MHz Channel analog: 2 F max.: 100 μF F resolution: 0.01 μF Input: Impedance F: 21 pF Rise Time: 14 ns Sample(ISO CALIBRATED)

Screwdriver Drive: Pozidriv Size: PZ1 Variants: ESD Blade length: 25 mm Overall length: 81 mm

Screwdriver Drive: Phillips Size: PH1 Variants: ESD Blade length: 25 mm Overall length: 81 mm

Handheld Oscilloscope Dimensions L x W x H: 199 x 118 x 49 mm Time basis: 10 ns...50 s/div Vertical sensitivity/div: 5 mV...20 V/div Weight: 0.9 kg Delivery with: 1 Probes / Channel / Carrying Case / Extension Module / Mains Power Battery Charger / Manual / Rechargeable Battery / Software / Test Lead / USB Cable Display: 3.5" TFT-LCD Electrical supply: Li-ion battery / Mains power battery charger Input coupling: AC / DC / GND Input impedance Ohm: 1 MOhm Measuring function: Continuity tester / Diode tester Series: UNI-T UTD1000 Trigger: Auto / Edge / Normal / Pulse width / Rise/Fall Time / Single / Video Type of measurement: RMS AAC max.: 4 A AAC resolution: 0.1 μA ADC max.: 4 A ADC resolution: 0.1 μA Bandwidth: 25 MHz Channel analog: 1 F max.: 100 μF F resolution: 0.01 μF Input: Impedance F: 21 pF Rise Time: 14 ns Sample rate, single-shot: 0.2 GS/s<b

Handheld Oscilloscope Dimensions L x W x H: 199 x 118 x 49 mm Time basis: 10 ns...50 s/div Vertical sensitivity/div: 5 mV...20 V/div Weight: 0.9 kg Delivery with: 1 Probes / Channel / Carrying Case / Extension Module / Mains Power Battery Charger / Manual / Rechargeable Battery / Software / Test Lead / USB Cable Display: 3.5" TFT-LCD Electrical supply: Li-ion battery / Mains power battery charger Input coupling: AC / DC / GND Input impedance Ohm: 1 MOhm Measuring function: Continuity tester / Diode tester Series: UNI-T UTD1000 Trigger: Auto / Edge / Normal / Pulse width / Rise/Fall Time / Single / Video Type of measurement: RMS AAC max.: 4 A AAC resolution: 0.1 μA ADC max.: 4 A ADC resolution: 0.1 μA Bandwidth: 25 MHz Channel analog: 1 F max.: 100 μF F resolution: 0.01 μF Input: Impedance F: 21 pF Rise Time: 14 ns Sample rate, single-shot: 200 MS/s<b