OnSemi公司的NCP3065是高达1.5A恒流开关稳压器,输入电压从3.0V到40V,反馈电压235mV,工作频率可调整到高达250kHz,逐个周期限流,主要用在汽车照明,大功率LED驱动器,恒流源已急低压LED照明.本文介绍NCP3065主要特性,方框图,典型降压应用电路,降压演示板应用电路和材料清单,升压演示板应用电路和材料清单,以及1-5WMR16LED驱动GreenPoin解决方案框图,应用电路和材料清单.NCP3065,NCV3065:Upto1.5AConstantCurrentSwitchingRegulatorforL
OnSemi公司的NCP3065是高达1.5A恒流
开关稳压器,输入电压从3.0V到
40V,反馈电压
235mV,工作频率可调整到高达
250kHz,逐个周期限流,主要用在汽车照明,大功率
LED驱动器,恒流源已急低压LED照明.本文介绍NCP3065主要特性, 方框图, 典型降压应用电路, 降压演示板应用电路和材料清单, 升压演示板应用电路和材料清单,以及1-5W MR16 LED驱动GreenPoin解决方案框图,应用电路和材料清单.
NCP3065, NCV3065: Up to 1.5 A Constant Current Switching
Regulator for LEDs The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering
highbrightness LEDs. The device h
asa very low feedback voltage of 235 mV (nominal) which is used to regulate the average current of the LED string. In addition, the NCP3065 has a wide input voltage up to 40 V to allow it to operate from 12 Vac or 12 Vdc supplies commonly used for lighting applications as well as unregulated supplies such as Lead Acid batteries. The device can be configured in a controller topology with the addition of an external transistor to support higher LED currents beyond the 1.5 A rated switch current of the internal transistor. The NCP3065 switching regulator can be configured in Step−Down (Buck) and Step−Up (boost) topologies with a minimum number of external components.
