Melexis公司的MLX90129是13.56MHzRFID传感器标签和数据采集器,它把外部电阻型传感器的精密采集链和各种接口组合在一起,能通过ISO15693RFID前端或SPI端口进行接入和控制,仅需接上13.56MHz调谐天线,它就成为RFID温度计.MLX90129主要用于冷链监视,资产管理和监视,建筑物自动化,以及工业,医疗和住宅区控制与监视.本文介绍了MLX90129主要特性,方框图,RFID温度传感器标签,数据采集器以及基于MCU的MLX90129应用电路,MLX90129评估板EVB9012
Melexis公司的MLX90129是13.56MHz
RFID
传感器标签和数据采集器,它把外部
电阻型传感器的精密采集链和各种接口组合在一起,能通过
ISO15693 RFID前端或
SPI端口进行接入和控制,仅需接上13.56MHz调谐
天线,它就成为RFID温度计. MLX90129主要用于冷链监视,资产管理和监视,建筑物自动化,以及工业,医疗和住宅区控制与监视.本文介绍了MLX90129主要特性,方框图, RFID
温度传感器标签, 数据采集器以及基于
MCU的MLX90129应用电路, MLX90129评估板EVB90129主要特性,方框图,详细电路图和材料清单.
MLX90129: 13.56MHZ SENSOR TAG / DATALOGGER
ICThe MLX90129 combines a precise acquisiti
onchain for external resistive sensors, with a wide range of interface possibilities.
It can be accessed and controlled through its ISO15693 RFID front-end or via its SPI port.Without any other component than a 13,56MHz tuned antenna, it becomes a RFID thermometer. For me
asuring others physical quantities, one or two resistive sensors can be connected to make batteryless sensing point. Also, the chip can supply a regulated voltage to the other components of the application. Adding a battery will enable the use of the standalone data logging mode. The sensor output data is stored in the internal 3.5kbits user memory.
One can extend the storage capacity by connecting an external
EEPROMto the SPI port.The SPI port can also connect the MLX90129 to a microcontroller which allows more specific applications, like adding actuating capability or RF transmission.
The MLX90129 has been optimized for low
power, low voltage battery and battery-less applications.